Hej
Har tappat bort ena nyckeln i en sjö :)
Så jag har en reservnyckel som fungerar och sedan har jag bara dosan med chip utan blad. Har beställt nytt blad och fått det slipat samt satt i nytt batteri i dosan.
Mitt problem är att dosan inte fungerar att låsa upp. Jag tror att den en gång fungerat då det ser orginal ut så om jag bara kan få igång den så kanske den fungerar. Till mitt problem är att i mektips så ska man stoppa i ej fungerande nyckel i dörren och den fungerande i tändningslåset.
Låset kärvar då det säkert aldrig är använt sedan fabriken 2006. Så jag får inte in nyckeln.
Hur gör jag för att synkronisera nyckeln utan att hålla på med låset i bildörren?
-Kan jag veva ner rutan och lura bilen då jag sticker in nyckeln i bildörren men låser upp med knappen inifrån?
-Kan man synka utan dörren?
Tacksam för hjälp, då bilfirman vill ha 1000spänn :(
Synkronisera nyckel - imobilizer aktiv
-
dunderdon
- Inlägg: 0
- Blev medlem: 14 november 2014, 19:46
- Ort: Borås
- Bilmodell: Skoda Octavia kombi RS 2006
- Kontakt:
-
dunderdon
- Inlägg: 0
- Blev medlem: 14 november 2014, 19:46
- Ort: Borås
- Bilmodell: Skoda Octavia kombi RS 2006
- Kontakt:
Sv:Synkronisera nyckel - imobilizer aktiv
Tillägg:
1. Få igång fjärrlåset
2. Få bort startspärren
1. Få igång fjärrlåset
2. Få bort startspärren
-
dunderdon
- Inlägg: 0
- Blev medlem: 14 november 2014, 19:46
- Ort: Borås
- Bilmodell: Skoda Octavia kombi RS 2006
- Kontakt:
Sv:Sv:Synkronisera nyckel - imobilizer aktiv
Hittade dessa två varianter som inte står under mektips. Har inte testat.
the second key needs to be coded to the cars immobiliser system which does need to be done by a specialist. However there is a way around it if you don't have a second key.
get a plain key and have the blade cut, sit in the drivers seat with the window down and the 'cut but not immobiliser programmed' key in the door outside.
Put your original key in the ignition and turn to position 1.
either have a friend help or reach our through the open window and lock the car using the 'cut but not immobiliser programmed' key.
press unlock, lock, unlock on your original key, then remove it from the ignition. Remove the key from the door and test your fob, it should be working.
------------####-----------#####---------
the second key needs to be coded to the cars immobiliser system which does need to be done by a specialist. However there is a way around it if you don't have a second key.
get a plain key and have the blade cut, sit in the drivers seat with the window down and the 'cut but not immobiliser programmed' key in the door outside.
Put your original key in the ignition and turn to position 1.
either have a friend help or reach our through the open window and lock the car using the 'cut but not immobiliser programmed' key.
press unlock, lock, unlock on your original key, then remove it from the ignition. Remove the key from the door and test your fob, it should be working.
the second key needs to be coded to the cars immobiliser system which does need to be done by a specialist. However there is a way around it if you don't have a second key.
get a plain key and have the blade cut, sit in the drivers seat with the window down and the 'cut but not immobiliser programmed' key in the door outside.
Put your original key in the ignition and turn to position 1.
either have a friend help or reach our through the open window and lock the car using the 'cut but not immobiliser programmed' key.
press unlock, lock, unlock on your original key, then remove it from the ignition. Remove the key from the door and test your fob, it should be working.
------------####-----------#####---------
the second key needs to be coded to the cars immobiliser system which does need to be done by a specialist. However there is a way around it if you don't have a second key.
get a plain key and have the blade cut, sit in the drivers seat with the window down and the 'cut but not immobiliser programmed' key in the door outside.
Put your original key in the ignition and turn to position 1.
either have a friend help or reach our through the open window and lock the car using the 'cut but not immobiliser programmed' key.
press unlock, lock, unlock on your original key, then remove it from the ignition. Remove the key from the door and test your fob, it should be working.